Product ID:R-373 RUBBER INSUL ADHESIVE, 373
MSDS Date:11/01/1991
FSC:8040
NIIN:01-278-0145
MSDS Number: BJFWV

RUBATEX CORP

805 MONROE STREET
BEDFORD, VA 24523
US

Emergency Phone: 703-586-2611

Info Phone: 703-586-2611

Preparer: W.F. CREASY

Cage: IO124

RUBATEX CORP SUB OF GREAT AMERICAN INDUSTRIES INC

340 BEDFORD, VA 24523 US

Telephone: 800-378-4091

Cage: 82942

22

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 16%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

140

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 28%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

186

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 36%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOTE:TOLUENE (108-88-3) APPEARS ON
NAVY LIST OF OCCUP CHEM REPROD HAZARDS. SEEK CONSULTATION FROM
APPROP HLTH PROFS CONCERNING LATEST HAZ LIST INFO & SAFE HNDLG &
EXPOS RECOMS . INHAL:DIZZINESS, BREATHING DIFFICULTY, HEADACHE &
LOSS OF COORDINATION. EYE:SEVERE IRRIT, TEARING, REDNESS & BLURRED
(EFTS OF OVEREXPOSE
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:VISION. SKIN:CAN DRY & DEFAT SKIN
CAUSING CRACKS, IRRITATION & DERMATITIS. INGEST:CAN CAUSE GI
IRRITATION, VOMITING, NAUSEA & DIARRHEA.
Medical Cond Aggravated by Exposure:ANESTHESIA, RESPIRATORY TRACT
IRRITATION, DERMATITIS, NAUSEA, VOMITING.

First Aid:INHAL: MOVE VICTIM TO FRESH AIR, SUPPORT BREATHING
(O*2/ARTIFICIAL RESP), SEE MD IMMEDIATELY. EYE: FLUSH W/ WATER FOR
15 MINUTES, SEE MD. SKIN: WASH THOROUGHLY WITH SOAP AND WATER. SEE
MD. INGEST: DO NOT INDUCE VOMITING. SEE MD IMMEDIATELY.

Flash Point Method:CC
Flash Point:-14F,-26C
Lower Limits:1.0
Extinguishing Media:FOAM, DRY CHEMICAL, CO*2
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . USE WATER FOG TO COOL FIRE EXPOSED
CONTAINERS AND NOT FOR FIRE FIGHTING PURPOSES.
Unusual Fire/Explosion Hazard:HANDLE AS FLAMMABLE LIQUID. VAPORS FORM
AN EXPLOSIVE MIXTURE IN AIR BETWEEN LEL & UEL AND CAN BE READILY
IGNITED.

Spill Release Procedures:ELIMINATE IGNITION SOURCES, PROVIDE GOOD
VENTILATION, DIKE SPILL AREA AND USE ABSORBENT MATERIAL TO CLEAN
UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE NON-SPARKING UTENSILS WHEN HNDLG
THIS MATL. AVOID HOT METAL SURFACES. USE IN COOL, WELL VENTILATED
AREAS. KEEP CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:KEEP AWAY FROM HEAT AND OPEN FLAMES. SMOKING IN AREAS
WHERE THIS MATL IS USED SHOULD BE STRICTLY PROHIBITED. TOOLS USED
SHOULD BE MADE OF ALUMINUM, BRASS, OR COPPER. DO NOT USE PLASTIC
UTENSILS.

Respiratory Protection:WHEN SPRAYING THIS ADHESIVE USE A NIOSH/MSHA
APPRVD CARTRIDGE RESP/GAS MASK SUITABLE TO KEEP AIRBORNE MISTS &
CONCS BELOW TLVS. WHEN USING IN POORLY VENTED & CONFINED SPACES,
USE A NIOSH/MSHA APPRVD F RESH-AIR SUPPLYING RESP/SCBA.
Ventilation:GENERAL MECHANICAL OR LOCAL EXHAUST VENTILATION TO KEEP
VAPOR CONC BELOW TLV. USE EXPLOSION-PROOF VENTILATION EQUIPMENT.
Protective Gloves:IMPERMEABLE
Eye Protection:CHEM WORK GOG & FULL LGTH FCSHLD .
Other Protective Equipment:USE IMPERMEABLE APRONS AND PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT. USE OF HEAD CAPS IS STRONGLY
RECOMMENDED.
Work Hygienic Practices:EYE WASHES AND SAFETY SHOWERS WITHIN THE
WORKPLACE ARE RECOMMENDED.
Supplemental Safety and Health
NONE

Boiling Pt:B.P. Text:>132F,>56C
Vapor Pres:SEE INGRD
Vapor Density:> AIR
Spec Gravity:0.8
Evaporation Rate & Reference:< ETHER
Solubility in Water:NO
Appearance and Odor:BLUE. OFFENSIVE ODOR.

Stability Indicator/Materials to Avoid:YES
ALKALINE MATLS, STRONG ACIDS AND OXIDIZING MATLS.
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERES, AND EXCESSIVE AGING.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN AND POSSIBLE ACROLEIN.

Waste Disposal Methods:COLLECT ABSORBENT/SPILLED LIQUID MIXTURE AND
PLACE INTO METAL CONTAINERS. CONSULT LOCAL, STATE AND FEDERAL
HAZARDOUS WASTE REGULATIONS BEFORE DISPOSING INTO HAZARDOUS WASTE
LANDFILLS. OBEY RELEVANT LA WS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.